grinder

1. The machine includes a vacuum cleaner [one-piece type cannot be used separately], grinding and vacuuming are carried out synchronously, so as to achieve dust-free construction. 2. The machine is equipped with diamond cutters of different thicknesses, which can realize the grinding of all kinds of floors [such as hardened wear-resistant, terrazzo, emery floors, all kinds of concrete base surfaces, grinding, dressing and roughening]. It can also be used for thin-layer paint and epoxy. Grinding removal treatment. 3. The fine grinding tool can be finely ground for the surface of the floor. In addition, the intermediate layer of the epoxy floor can be leveled. 4. The low center of gravity design of the machine greatly improves the operating comfort and stability during high-load construction. 5. With a reverse steering switch, if the motor steering is found to be reversed, just toggle the switch to change the rotation direction of the motor. 6. With a leakage protector, the safety of the operator is greatly improved. 7. The fuselage is compact and flexible in operation, so it is not limited by the size of the construction site, and there is no dead angle between the fuselage and the wall during construction. 8. Imported motor, strong suction. Very low failure rate, 24 hours of continuous dust-free construction. This machine has a new infrared scanning device, which can automatically level. The bottom is equipped with an independent suspension level, no need for manual leveling, and the motor is a variable frequency motor to achieve automatic speed regulation.