Multifunctional tower crane hopper

Use of tower crane hopper: The grouting hopper does not need an external wall shelf, and can be moved and placed at will. It is suitable for balconies, geothermal heating, columns, etc. At the same time, it can also send ash directly to the room through the winch and balcony, and the tower crane hopper is free of charge. In the past, the old-fashioned hoppers required people to go to the balcony to collect ash and pour ash. At the same time, the cm05 tower crane hopper also avoided the need for cross-working tower crane hoppers in some construction sites. The interior walls of the tower crane hoppers were not wiped, the ground was not hit, and the external wall shelves were not ways to dismantle the paradox. The tower crane hopper is also called tower crane hopper, tower crane ash hopper, sand slurry hopper, concrete hopper, etc. It is mainly used in the construction of high-rise buildings such as building foundation pouring concrete, transporting and mixing, wall batching, piling, ring beam and other high-rise buildings. The hoisting concrete hopper is suitable for the cross operation of high-rise buildings, masonry filling wall blocks and mortar, transporting and pouring secondary structural concrete, plastering after section acceptance, transporting construction waste, etc. The construction freight elevator must have insufficient transportation capacity. At this time, the tower crane hopper serves the steel bar and formwork team of the main structure, which is more leisurely. Now use the tower crane to transport the mortar and concrete vertically to solve the insufficient capacity of the freight elevator and the tower crane hopper. Tower crane hopper saves labor and material: (1) Compared with the old-fashioned hopper, the grouting upper hopper not only saves the labor cost of the material production, installation and dismantling of the wooden iron ash trough, but also avoids the phenomenon of removing the ash in the old-fashioned hopper during operation. (2) Compared with elevators, tower crane hopper grouting saves a lot of time, and the risk factor is greatly reduced. (3) The tower crane hopper grouting upper hopper saves a lot of labor compared with the ground pump stepper. Reasons for using tower crane hoppers: In reality, many low-rise buildings do not install well-frames and freight elevators, but nail wooden flow troughs. Such an operation is firstly the unsafe operation of the operator, and then the material is thrown when the material is discharged. , waste materials and cause a lot of construction waste. It is also necessary to move the wood runner frequently, which will waste labor and cause unsafe factors. So choose the launder tower crane hopper to create benefits and save materials for you. Matters needing attention: The oil wire rope and the hook of the tower crane must be hung firmly to avoid decoupling. Hopper maintenance: at the end of use, rinse with clean water in time.