Concrete batching plant is a building material manufacturing equipment commonly used in various large, medium and small projects. How to manage the concrete batching plant well plays an important role in its production efficiency and quality. Here, the staff of Far East Machinery will explain the management method of concrete batching plant to users:
1. Safety management of staff:
1. Staff need to wear protective equipment when operating the concrete batching plant. Such as hard hats, safety shoes, safety glasses, thick gloves, hearing protectors, reflective clothing, rain gear and masks.
2. Staff should avoid wearing loose clothing, jewelry, or other things that can catch parts such as controls.
3. When operating the machine safely, the staff are required to pay full attention. Do not listen to the radio or music headphones while operating.
4. Exposure to loud noises for a long time will cause hearing damage or loss. At this time, staff should wear appropriate hearing protectors, such as earplugs, to avoid harmful or uncomfortable loud noises.
2. Protection and management of concrete batching plant equipment:
1. Before the operation of the concrete mixing plant, the relative positions of the major components should be checked, and the small parts should not be missing or missing.
2. All connecting parts, such as bolts, etc., must be firmly connected without loosening.
3. The water supply pipeline and air supply pipeline must be sealed and reliable, and there should be no water leakage or air leakage. The pipeline layout should be neat and beautiful.
4. Each joint of the aggregate and powder conveying system must be sealed and reliable, and no ash should be leaked.
5. When installing the belt conveyor, the straightness of the center of the frame must be ensured, and both sides of the frame must be level.
6. Each powder silo is firmly connected, and the vertical error between the axis of the powder silo and the ground is not more than 2%.
7. The electrical wiring is correct and the wiring is firm.
8. Lubricate the unlubricated parts.
9. The appearance of the equipment should be neat and tidy, and there should be no paint peeling.
10. Debug the system.
