Mixing plant operators tend to ignore the cleaning and maintenance of concrete mixing plants after get off work. But we all know that daily maintenance is very helpful for the prolonged use of concrete batching plants.
After get off work, simple concrete mixer maintenance for concrete mixing plants, to obtain a guarantee of how to withstand long-term use efficiently, without affecting the service life of the equipment, the downtime of daily commuting equipment, a simple inspection and maintenance to ensure that the equipment is All parts are normal. Because it is a simple daily maintenance, of course, what needs to be done is not as much as a major inspection and major maintenance, but even simple maintenance should be careful and serious.
When the operation work of the concrete batching plant is finished, the shutdown order is according to the normal production specifications to ensure the correct operation. After the shutdown, determine the concrete mixing plant, check the mixing blades and linings for wear, see if the equipment parts or need to be updated or the lubrication of the contact surface, and check whether the screws at the connection position are loose.
Check the conveyor belt surface of the concrete batching plant, if there is peeling or breakage, it needs to be replaced. If the equipment is disabled, the hopper, the hopper can not save material, before starting again, put the cement silo inside clean must pay attention to moisture-proof to avoid cement hardening and solidification. Identify the equipment needed, and places that are closed after hours.
When it is determined that the above work is done, the operator of the concrete batching plant has completed the simple maintenance of the concrete batching plant. In this way, it can be well ensured that the concrete batching plant will not have frequent failures and other problems when it is used.
